BROWNING VS-218 Insert Bearings Spherical OD

Cap bolt recommended tightening torque:1220 N·m; N1:22.225 mm; Ca:82.804 mm; Cap bolt:2 x 1-8 UNC; H1:133.35 mm; Cap bolt, SAE grade:8; Stabilizing ring:SR-24-20; Appropriate attachment bolt size G:0.75 in; Initial grease fill:379.89 g; Mass pillow block:51.3 kg;

SKU:6005-2rs/c3-qbl; Weight:0.02 KGS; D:47mm; Clearance:C3; Seals or Shields:Two Rubber Seals; Availability:In Stock; d:25mm; Cage Type:Steel; B:12mm;

insert bearing type:Setscrew Lock - Wide; misalignment angle:1-1/2 °; duty type:Normal Duty; insert material:52100 Bearing Steel; bearing type:Tapped Base; housing type:Pillow Block Bearing; series:200; cage material:Nylon; lubrication type:Grease; expansion type:Non-Expansion Bearin;

Recommended diameter for attachment bolts, inch G:0.5 in; s1:22.2 mm; Recommended tightening torque for grub screw:4 N·m; Limiting speed:3800 r/min; A1:25 mm; B:38.1 mm; Recommended diameter for attachment bolts, mm G:12 mm; H2:19 mm; Bearing:YAR 206-104-2RF/VE49; N1:14.5 mm;

bearing material:Oil-Impregnated Bron; standards met:SAE 841, CT-1000-K26; maximum v value:1200 (sfm); sleeve bearing type:Flanged Bearing; d:1/2 in; manufacturer catalog:Click here; material specification:Oilite®, Synthet; D:31/32 in; maximum pv value:50000; operating temper

thread type:UNF-3A; shank thread size:3/4-16; manufacturer product page:Click here; radial static load capacity:14000 lbf; length to ball center:2.8750 in; rod end type:Male Threaded with M; ball width:0.8750 in; shank thread length:1.7500 in; weight:0.63 lbs; operating temperature range:Max 25

material:Steel; finish:Zinc Plated; length:1 ft; thickness:1-1/4 in; type:Oversized; width:1-1/4 in;

maximum rpm:2750 RPM; seal type:Triple Lip with Flin; finish/coating:Uncoated; radial dynamic load capacity:11791 lb; series:212; B:7.1300 in; bolt circle diameter:6.0000 in; expansion type:Non-Expansion Bearin; manufacturer catalog number:076174; length through bore:2.54 in;

bore type:Round; operating temperature range:Max 180°; d:1.6875 in; manufacturer catalog number:724979; mounting:Two-Bolt Base; overall length:7.5000 in; finish/coating:Uncoated; B:1.9375 in; series:NP; overall height:4.2500 in;

d:1.5000 in; inner ring width:1.8750 in; manufacturer catalog number:1842405000; series:BTS-LS; radial static load capacity:130000 lb; lubrication type:Requires Lubrication; grade:Precision, Heavy Dut; misalignment angle:7.5 °; bearing type:Radial; axial static load capacity:26000 lb;

snap ring included:Without Snap Ring; d:6 mm; cage material:Steel; B:6 mm; precision rating:Not Rated; bore type:Round; D:19 mm; series:30; internal clearance:C0; static load capacity:195 lbs;

bearing type:Spherical Roller; manufacturer upc number:883450109499; end type:Open; seal type:Labyrnith non-contac; D:4.7700 in; B:3.3400 in; bolt circle diameter:6.7500 in; weight:19 lbs; lubrication type:Lubrication Fitting; bore type:Round;

bearing material:52100 Steel; row type & fill slot:Single Row Non-Fill; manufacturer catalog:Click here; manufacturer upc number:8865590012077; d:9 mm; snap ring included:Without Snap Ring; inner ring width:0.4970 in; D:26 mm; B:0.4063 in; bore type:Round;

width:1.2500 in; closure type:N/A; D:1.1250 in; d:0.8750 in; type of needle bearing:Separable Inner Ring; minimum radius:1.02 mm; series:IR; material:Chrome Steel; standards met:ASTMF-2431; lubrication hole type:No Lubrication Hole;

d:1.9375 in; inner ring width:1.9375 in; cage material:Nylon; snap ring included:Without Snap Ring; series:G-KRRB; finish/coating:Uncoated; B:1-15/16 in; D:90 mm; bore type:Round; outer ring width:23 mm;