KOYO 23252R spherical roller bearings

Grease Speed Rating Open/Shielded n1:4300 rpm; d:65.000 mm; Oil Speed Rating Open/Shielded n2:5300 rpm; Accessories:Two Shields & Snap-R; B:23.00 mm; D:120.0000 mm; Basic Dynamic Radial Load Rating C:69300 N; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:65500 N;

Locating ring:2 x FRB 22/600; Cap bolt, rec. tightening torque:600 N·m; bb:140 mm; End cover:ETS 3172 R; H1:350 mm; A:395 mm; Ca:192 mm; bc:208.5 mm; P120°:2700 kN; P90°:3600 kN;

J1:200 mm; J:750 mm; Oil level, max.:92 mm; Ca:198 mm; Q180°:1430 kN; N4 max.:25 mm; N:50 mm; P90°:3400 kN; Oil seal:2 x TSD 3072/13.7/16; da:341.313 mm;

ra max.:0.6 mm; Fatigue load limit Pu:7.8 kN; D:68 mm; Basic static load rating C0:64 kN; C:22 mm; Limiting speed:3800 r/min; Basic dynamic load rating C:39.1 kN; Fw:52 mm; r1,2 min.:0.6 mm; Mass bearing:0.16 kg;

D:15.9000 mm; Grease Speed Rating Open/Shielded n1:44000 rpm; Shielded or Sealed B1:5.0 mm; Fillet Radius ra:0.30 mm; Basic Dynamic Radial Load Rating C:1480 N; d:6.400 mm; Accessories:Without Accessories; Basic Static Radial Load Rating Co:620 N; Oil Speed Rating Open/Shielded n2:54000 rpm; Sealed

Basic Dynamic Radial Load Rating C:221000 N; Grease Speed Rating n1:6600 rpm; d:95.000 mm; B:64.00 mm; Oil Speed Rating n2:9600 rpm; D:170.0000 mm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:236000 N; Fillet Radius rb:1.00 mm;

Basic dynamic load rating C:33.2 kN; DN:6.5 mm; Db2:111 mm; J6:120.5 mm; Rα:45 °; A1:14 mm; Recommended diameter for attachment bolts, inch G:0.5625 in; N:16 mm; N4:2 mm; GN:1/4-28 SAE-LT;

Grease Speed Rating Open/Shielded n1:4000 rpm; B:20.00 mm; D:150.0000 mm; Accessories:One Shield; Basic Static Radial Load Rating Co:44000 N; Fillet Radius ra:1.00 mm; d:110.000 mm; Basic Dynamic Radial Load Rating C:43600 N; Sealed Speed Rating n3:2500 rpm; Oil Speed Rating Open/Shielded n2:4800 rp

Oil:548.090 kN; rs (min):6 mm; with tapered bore:350 min-1; Static (Cor):22.3 mm; d:500 mm; Grease:7970 kN; D:720 mm; B:167 mm; Pu:3830 kN; Dynamic (Cr):12 mm;

Mass bearing:0.24 kg; Calculation factor f:1.06; d:45 mm; rb max.:0.6 mm; Preload class C GC:410 N; D:75 mm; Db max.:70.8 mm; Preload class A GA:70 N; Preload class B GB:210 N; da min.:49.6 mm;

L:244.475 mm; Bearing limiting speed:7000 r/min; Cap bolt recommended tightening torque:149.1 N·m; S:4.763 mm; ba:30.956 mm; Ca:45.796 mm; P120°:13.3 kN; PG:1/8 NPT; Pa:4.89 kN; da:34.925 mm;

End plug (suffix Y):EPR 11; Stabilizing ring:2 x SR-1618; Bearing:1318 K; Max. speed for Taconite seal:950 r/min; P150°:44.5 kN; Da:190 mm; Taconite seal:TER 187; Pa:11.6 kN; Initial grease fill:481.95 g; L:393.7 mm;

D:150.0000 mm; Oil Speed Rating Open/Shielded n2:5000 rpm; Basic Static Radial Load Rating Co:54000 N; B:24.00 mm; d:100.000 mm; Fillet Radius ra:1.50 mm; Accessories:Two Shields & Snap-R; Basic Dynamic Radial Load Rating C:63700 N; Grease Speed Rating Open/Shielded n1:4300 rpm; Sealed Speed Rating

Basic Radial Load Rating-Dynamic DC:8190 N; Old MRC Bearing Number:201FSF; Basic Interchange NDH:87501; Fillet Radius ra:0.64 mm; d:12.000 mm; Width - Overall B:12.7 mm; D:32.0000 mm; Basic Radial Load Rating-Static SCO:3650 N; Speed Rating-Single and Double Sealed Grease SDG:15000 rpm; Accessories:

d1:77.787 mm; Lock nut:AN 18; Threads per inch:12; Lock washer:W 18; G:89.586 mm; Hydraulic nut:HMVC 18E; Mass adapter sleeve assembly:1.8 kg; B1:89.992 mm; B4:19.863 mm; Sleeve:S 118x3.1/16;